SH18 SH25 WF25 kits and options - vertical and horizontal co-axial (balanced) flues


 ⚠️Safety Notice – Wall Furnace Products 

 

This appliance must only be installed, commissioned, serviced and repaired by suitably qualified and licensed personnel.

Before commencing work, complete a risk assessment and ensure gas and electrical safety, combustion air requirements, flue integrity, safe clearances and appropriate PPE have been considered. All work must comply with applicable regulations, standards and manufacturer requirements.

Particular care must be taken when working around gas systems, electrical components, combustion products, hot surfaces, flue systems and roof or ceiling spaces associated with the flue installation.

Do not proceed if safe access, flueing requirements, required clearances or appropriate safety controls cannot be maintained.

Safety takes priority over diagnosis, repairs and installation schedules. If the task cannot be completed safely, it must not proceed.


Attachments included:
Replacing existing wall furnaces with WF25 balanced flue wall furnace
SH18 SH25 WF25 balanced flue wall furnace information
SH18 SH25 WF25 balanced flue wall furnace kits and options
SH18 SH25 WF25 Horizontal Flue 636689b
SH18 SH25 WF25 Installation Manual 634166d
SH18 SH25 WF25 Vertical Flue 636696d






Regards 

Seeley International 

Technical Support 

Phone:1300 650 399
 

Seeley Service Web Resource is for suitably qualified personnel only and contains a large library of Seeley International Service/Installation/Technical/Training and Spare parts information. Follow the link https://www.seeleyinternational.com/login/ to register

 

Spare Parts Identification follow the link https://spares.seeleyinternational.com/parts