⚠️ Safety Notice – Gas Heating Products
This appliance must only be installed, commissioned, serviced and repaired by suitably qualified and licensed personnel.
Before commencing work, complete a task-specific risk assessment and ensure gas and electrical safety requirements, ventilation provisions, safe access, adequate service clearances and appropriate PPE have been considered. All work must comply with applicable regulations, standards and manufacturer requirements.
Particular care must be taken when working around gas systems, electrical components, combustion products, hot surfaces, moving parts, roof spaces, ceiling spaces and confined spaces.
Do not proceed if safe access, required clearances, ventilation requirements, confined space risks or appropriate safety controls cannot be achieved and maintained.
Safety takes priority over diagnosis, repairs, installation schedules and customer expectations. If the task cannot be completed safely, it must not proceed until the risks have been adequately controlled.
Click here to view YouTube video Spectrolink SCC accessing and clearing fault code history
See attached Pdf FC11 displayed to user on SCC TG and TH
If gas valve is not getting voltage to energize it
Always check the flame rollout OT3 (manual over temperature switch above the burners) hasn't tripped - press red button to reset
If gas valve is not getting voltage to energize it
Always check the flame rollout OT3 (manual over temperature switch above the burners) hasn't tripped - press red button to reset
