MagIQtouch Child Lock - enabling or disabling - override code 5331


⚠️ Customer Safety Notice

This article contains general information intended for homeowners and occupants. Installation, servicing, repairs, electrical work, gas work and refrigerant-related work must only be carried out by appropriately qualified and licensed personnel.

Before performing any checks or maintenance, ensure the equipment is switched off and safe to access. Do not remove covers, enter roof or ceiling spaces, work at heights or attempt repairs unless you are qualified to do so.


If in doubt, contact an authorised service agent or licensed tradesperson. Safety must always take priority.


· Child lock is a feature that can be turned on to prevent changes to the heaters operation without entering a code


· If you wish to turn child lock off you will need the child lock code you entered, if you no longer remember the code or someone else has turned this feature on 

you can override the code using the code 5331


· When prompted to enter the child lock code, enter the code 5331 and push CONT.


· NOTE : The child lock will re-activate each time the screen goes into sleep mode


· Go to SETTINGS – GENERAL – CHILD ACCESS LOCK and press > ( child access lock is showing as ON)


· When prompted type in your child lock code or the 5331 override code and push CONT


· The screen should now show “LOCK DISABLED”


· Push the BACK button to leave it disabled. (child access lock should now show as OFF)


Please follow link: MagIQtouch Locking and Unlocking Child Lock