TQ DGH FC1, FC2, FC3 - FC1 PS low closed at start, FC2 PS low failed to close, FC3 PS low opened during run : Seeley International Pty Ltd

TQ DGH FC1, FC2, FC3 - FC1 PS low closed at start, FC2 PS low failed to close, FC3 PS low opened during run Print

Modified on: Wed, 15 May, 2024 at 2:20 PM

TQ DGH FC1, FC2, FC3 - FC1 PS low closed at start, FC2 PS low failed to close, FC3 PS low opened during run

Fault code history can be accessed:

SETTINGS/SERVICE/GAS HEATER 01/7378 CONT/FAULT LOG

YouTube Video - MagIQtouch Heater Fault Log

For ALL pressure switch failed to close and opened during run faults always check the integrity of the combustion fan pressure hose spigot (pressure tapping)

Remove and check that there is no partial blockages on the other side of the spigot (pressure tapping) caused by by products of combustion

COMBUSTION FAN SUCTION PRESSURE - CORRECT METHOD OF TESTING FOR ACCURATE READINGS DURING NORMAL HEATER OPERATION

Did you find it helpful? Yes No

TQ DGH FC1, FC2, FC3 - FC1 PS low closed at start, FC2 PS low failed to close, FC3 PS low opened during run Print

Related Articles