Climate Wizard - CW3 / CW6S tank support brackets (tank sagging) ONLY applicable pre serial # 00940091 and manufactured before 12/08/2021
CW3 / CW-6S Tank Reinforcement Bracket Upgrade Kit Pt# 901461
The CW3 / CW6S upgrade kit is designed to ensure the water level probe remains in the optimum position relative to the pumps over the lifetime of the cooler.
It is recommended that you fit the kit to CW3 / CW6 coolers when the tank appears to have sagged to the point that the pumps are starving of water at the low-level probe. The starving of water at the low-level probes can lead to inconsistent cooling performance, where the leaving air temperature gets progressively warmer before a tank top up is requested.
Another symptom that may indicate the tank support bracket is required is the side panels are difficult to refit after they have been removed.
Attached PDF is the instructions that will come with CW3 / CW-6S Tank Support Bracket Upgrade Kit
Pt# 901461