MS1 - MagIQtouch BMS Interface Product Training
⚠️ Safety Notice – MagIQtouch Controllers and Components / Accessories
MagIQtouch controllers and accessories control devices used to operate and monitor compatible evaporative coolers, ducted gas heaters and add-on cooling systems.
Installation, commissioning, servicing, fault finding and repairs must only be carried out by suitably qualified and licensed personnel where applicable. Before commencing work, complete a task-specific risk assessment and ensure electrical safety procedures, safe access and appropriate PPE have been considered. All work must comply with applicable regulations, standards and manufacturer requirements.
Particular care must be taken when working on or around electrical systems, communication wiring, control circuits, roof spaces, ceiling spaces and associated heating or cooling equipment connected to the controller.
Do not proceed if safe access, electrical isolation requirements, required clearances or appropriate safety controls cannot be achieved and maintained. This controller forms part of a complete heating and/or cooling system, and incorrect installation, testing or servicing may result in equipment damage or unsafe operation.
Safety takes priority over diagnosis, repairs, installation schedules and customer expectations. If the task cannot be completed safely, it must not proceed until the risks have been adequately controlled.
Pdf attached,
