Braemar Dominator Series – Installer Training (Summer 2025)
⚠️ Safety Notice – Reverse Cycle Air Conditioners
This equipment must only be installed, commissioned, serviced and repaired by suitably qualified and licensed personnel.
Before commencing work, complete a task-specific risk assessment and ensure electrical isolation procedures, safe access, adequate service clearances and appropriate PPE have been considered. All work must comply with applicable regulations, standards and manufacturer requirements.
Particular care must be taken when working around electrical systems, refrigerant circuits, moving parts, roof spaces, ceiling spaces, confined spaces and working-at-heights hazards where applicable.
Do not proceed if safe access, required clearances, confined space risks or appropriate safety controls cannot be achieved and maintained.
Safety takes priority over diagnosis, repairs, installation schedules and customer expectations. If the task cannot be completed safely, it must not proceed until the risks have been adequately controlled.
Overview
This article provides access to the official Braemar Dominator Series Installer Training Guide (Summer 2025).
The document contains detailed guidance covering:
- Installation procedures
- Electrical requirements
- Refrigerant charging
- Duct connections
- Fan tuning and commissioning
- Zone design and airflow requirements
Installer Documentation
Please refer to the attached PDF for full installation instructions:
Braemar Dominator Installer – Summer 2025
Important Notes
- This document is intended for qualified installers and technicians only
- Always follow site safety requirements and local regulations
- Ensure installation complies with all manufacturer specifications
