Braemar Dominator Series (KGHV) – Installation Manual + Installer Guide Insert
⚠️ Safety Notice – Reverse Cycle Air Conditioners
This equipment must only be installed, commissioned, serviced and repaired by suitably qualified and licensed personnel.
Before commencing work, complete a task-specific risk assessment and ensure electrical isolation procedures, safe access, adequate service clearances and appropriate PPE have been considered. All work must comply with applicable regulations, standards and manufacturer requirements.
Particular care must be taken when working around electrical systems, refrigerant circuits, moving parts, roof spaces, ceiling spaces, confined spaces and working-at-heights hazards where applicable.
Do not proceed if safe access, required clearances, confined space risks or appropriate safety controls cannot be achieved and maintained.
Safety takes priority over diagnosis, repairs, installation schedules and customer expectations. If the task cannot be completed safely, it must not proceed until the risks have been adequately controlled.
Overview
This article provides the complete installation documentation for the Braemar Dominator Series (KGHV):
- ✅ Installation Manual (KGHV‑02‑E)
- ✅ Installer Guide Insert / Setting Guide Addendum (KGHV‑05‑A)
? Important:
The Installer Guide Insert (KGHV‑05‑A) is not optional — it contains critical updates and settings and must always be used together with the installation manual.
Included Documents
1. Installation Manual (Primary Document)
Document: KGHV‑02‑E Installation Manual
Covers:
- Installation requirements and procedures
- Refrigerant pipework and charging
- Electrical wiring and schematics
- Commissioning and startup
- Safety requirements for R32 systems
- Error codes and troubleshooting
⚠️ The manual states installation must be carried out correctly to avoid safety risks, performance issues, or warranty impacts.
2. Installer Guide Insert / Setting Guide Addendum
Document: KGHV‑05‑A Installer Guide Insert
✅ This is the same document as the Setting Guide Addendum (v1.3) — do not duplicate.
This document provides:
- Quick reference installation clarifications
- Critical setup and configuration steps
- Fan speed setup and airflow adjustment
- Jumper plug configuration requirements
- 3rd party controller setup
- Refrigerant adjustment reference table
⚠️ The insert clearly states it is a supplementary quick reference and that the full installation manual must still be used.
How to Use These Documents
When installing a Dominator KGHV system:
Follow the Installation Manual (KGHV‑02‑E)
- Base installation, safety, wiring, pipework, commissioning
Apply the Installer Guide Insert (KGHV‑05‑A)
- Use for updated setup steps and configuration
- Follow all adjustments and overrides where specified
✅ Both documents must be used together for a complete installation.
Attachments
- Installation Manual – KGHV‑02‑E
- Installer Guide Insert – KGHV‑05‑A