Installation / Commissioning Information
Commercial Evap's Installation
Introduction: When a unit is first commissioned, and whenever the unit is being serviced, it is recommended that the flow rates to the evaporative pads be ...
Thu, 27 Feb, 2020 at 3:10 PM
The installing electrician is responsible to ensure electrical compliance with all local and national wiring rules and standards Connection to the Elec...
Thu, 27 Feb, 2020 at 3:12 PM
RPA and RPB Fan cut out template & instruction Kit - replacing a blower / fan wheel 631349-A Instructions included in fan cut out template kits: 6...
Mon, 28 Oct, 2024 at 10:46 AM
073392 Water Manager Kit to suit RPC / RPCQi variable speed (CPMD) NB: RPCQi connected to a MagIQtouch drain can be tested in the manual dr...
Thu, 16 Jun, 2022 at 10:04 AM
RPA, RPB, RPC 3-Phase (Δ) and Single-Phase (Φ) 2-Speed Commercial Wiring - Current and Historical Diagrams The wiring diagrams listed below are intende...
Tue, 28 Jan, 2025 at 3:22 PM
Maintenance and Care of Sealed Bearings on Medium Commercial Evaporative Coolers Note: Sealed bearings do not require greasing. Step-by-Step Guide ...
Thu, 27 Mar, 2025 at 1:45 PM
Maintenance and Care of Bearings for Large 3-Phase Commercial Evaporative Coolers Applicable Models: Large 3-Phase Commercial Evaporative Coolers with a...
Tue, 6 May, 2025 at 2:32 PM